Thank you for choosing the West Mountain Radio RIGrunner 4010S+. You will enjoy having a RIGrunner with durable, standardized Powerpole connections. ® Having proper DC distribution should make a long overdue improvement to the convenience and safety of your station.
Page 3
correct. Follow the amateur radio standard used by the RIGrunner. DO NOT PLUG IN without verifying that RED + PLUS and BLACK – MINUS is correct. The far left connector is labeled the DCIN and is supplied with a 40 amp fuse. The next connector is labeled “Master” and is always ON.
Page 4
Consult the owners manual for your unit or actually measure the power consumption. A West Mountain Radio PWRcheck is a handy way to easily measure Volts, Amps, Watts and Amp / hours all at the same time on one display.
The audible alert may be disabled by removing the internal jumper. Store the unused jumpers on a single pin to not lose them for later use. Operational Reference Switch Positions: Left: Unit off (except master outlet) Center: Auto mode Right: Unit on (unless voltage out of range) Internal Jumpers: Top:...
Page 6
Windows should find the driver on its own. Now the Yellow LED should be rapidly blinking. After the driver is found, start the West Mountain Radio diagnostics utility program. Find the RIGrunner 4010S+ in the list of devices. Right-click on the RIGrunner 4010S+ and select “TEST”.
RIGrunner Accessories Order Sku# Fuse Assortment Low Value (8pcs) #58537-1085 3- 1A, 3- 5A & 2- 10A Fuse Assortment High Value (8pcs) #58537-1086 2 ea. of 15A, 20A, 30A, 40A Buss 10A ATC Circuit Breaker #58537-1087 Buss 15A ATC Circuit Breaker #58537-1088 Buss 20A ATC Circuit Breaker #58537-1089...
Page 8
The RIGrunner is warranted against failure due to defects in workmanship or materials for one year after the date of purchase from West Mountain Radio or an authorized dealer. If purchased from an authorized dealer it must be returned with a copy of the original sales receipt or proof of purchase.
Need help?
Do you have a question about the RIGrunner 4010S+ and is the answer not in the manual?
Questions and answers