General Points; Introduction; General Specifications; Mechanical Characteristics - Bodet NETSILON 7 AC Quick Start Manual

1. GENERAL POINTS

Thank you for choosing the BODET Netsilon time server. This product has been carefully designed for your
satisfaction according to the rules of our ISO9001 and ISO14001 quality system.
We recommend that you read this manual carefully before using the product for the first time.
Failure to observe these instructions may cause irreversible damage and invalidate the warranty. BODET shall not
be responsible for any damage arising due to non-observance of these instructions.
Non-contractual data. Bodet reserves the right to make changes to equipment, including functional, technical and
aesthetic changes, without notice.
This manual is subject to change without notice. To obtain the most recent version of this document, please refer to
our website: www.bodet-time.com.

1.1 Introduction

Observe all safety precautions during installation, operation and maintenance of this device.
Key to symbols:
: indicates advice, a recommendation or any other noteworthy information relating to use of Netsilon.
: indicates that special attention needs to be paid.
: indicates that misuse or failure to follow the instructions could result in a electrical danger. This information
must be taken into account when installing or using Netsilon.
4 versions are available for each Netsilon time server model, depending on the power supply:
>
Netsilon 7 / 9 / 11 AC
>
Netsilon 7 / 9 / 11 DC
>
Netsilon 7 / 9 / 11 AC+DC
>
Netsilon 7 / 9 / 11 AC+AC
1.2 General specifications

1.2.1. Mechanical characteristics

Construction
Operating temperature
Relative Humidity level at 40°C
Protection class
Weight
Dimensions

1.2.2. Electrical characteristics

Power supply
Alarm Input
Alarm Output
MTBF
4
Metal case - 1 U rack - 19"
0°C to +50°C
0-90% RH without condensation
IP20
2.5 kg
442 x 264 x 44.2mm
AC : 100-240V / 50-60Hz / 1.9-0.8A
DC : 22-30V / 3.2-1.9 A
AC+DC Redundant power supplies,
AC+AC characteristics, above.
Alarm IN
Dry contact Input, potential-free contact
I ≤ 10 mA
IN
Alarm OUT
Relay NC-NO-C.
Maximum current : 1A/50V
100,000 hours
, 1A/30V