Loss Of Suction; Servicing & Spares - Kerstar KV30 Operating Instructions Manual

ENGLISH
GB

LOSS OF SUCTION

If your cleaner loses suction power, fi rst check that the hose and other accessories in use are not
blocked. When picking up dust, check that the cloth fi lter is clean. When sucking up water, loss of
suction is probably caused by the container becoming over-full or the net fi lter on the fl oat chamber
being clogged up. Empty the container and/or clean the net fi lter. The fl oat assembly must be regularly
cleaned and inspected for signs of damage. Any further servicing or maintenance should be carried
out by KERSTAR authorised service staff.
All models are fi tted with a thermal cutout switch which automatically stops the motor(s) if it
(they) overheat. This may be caused by a blocked hose or wands or a clogged up fi ltration system.
If your vacuum cleaner cuts out check for the above. The cutout switch will automatically reset
itself when the motor temperature drops.
SERVICING & SPARES
Should your KERSTAR VACUUM CLEANER need any servicing, repair or spares please contact
your nearest KERSTAR dealer or contact KERSTAR directly.
Please make a note of the model and serial number before contacting your dealer or Kerstar.
GUARANTEE
Kerstar products are guaranteed for 12 months against defective parts and workmanship. There are
certain conditions that may invalidate this guarantee.
a) This appliance must be correctly installed and used in accordance with these instructions.
b) Servicing must be carried out by Kerstar authorised personnel only.
c) The guarantee may be invalidated by unauthorised repair or modifi cation to the appliance.
KERSTAR LIMITED may introduce modifi cations to their products from time to time and consequently
the details given in this instruction book are subject to alteration without notice.
7