EHEIM skimmarine 100 Operating Instructions Manual page 16

English
3. With the other hand, move the magnet half with logo on the glass
panel away from the skimmer.
4. Remove the skimmer.
5. Remove the box (
6. Loosen the hose and then disassemble the airstone (
7. Pull the foam cup
8. Open the body by pressing in the two side latches at the same time
(
9. Unfold the body (
10. Using a brush, clean all components under a jet of water.
11. Install the skimmer again in reverse order.
When assembling, make sure that the hinge for both halves of the body
interlocks correctly (
Changing the lime wood airstone
The airstone must be changed approximately every 4 weeks.
To do so, proceed as follows:
1. Before maintenance work, remove the mains plug of the pump.
2. Hold the skimmer with one hand.
3. With the other hand, move the magnet half with logo on the glass
panel away from the skimmer.
4. Remove the skimmer.
5. Remove the box (
6. Loosen the hose and then disassemble the airstone (
7.
Only use original EHEIM spare parts:
Lime wood airstone art. no. 7373328
8. Install the skimmer again in reverse order.
In order to prevent the wood pores of the airstone from swelling, put the
skimmer into operation immediately after the change.
).
away with the cover facing upwards (
).
).
).
).
16
).
).
).