Table of Contents
Advertisement
English
4. Commissioning
Attention! Strong magnets! Danger of crushing!
Separate the magnets by twisting them.
Place the magnets at a distance of 30 cm away from each other.
1. Secure the dampening rubbers
gentle twisting motions.
2. At all four corners, press the magnet half without logo
dampening rubbers.
3.
Installing the lime wood airstone
1. Pull the box
2. Screw the airstone
The hose and pump are not included in the scope of delivery.
recommend that you use the EHEIM air pump 100 (art.no. 3701010).
used, and a higher pump performance may be required as a result.
3.
Hang the box in your aquarium and check the tightness of the connec-
tion. Ensure that no large air bubbles appear!
4. Place the box at the lower edge and fold it into the body.
1. With one hand, hold the skimmer at the desired position in the
aquarium from the inside.
2. With the other hand, carefully place the magnet half with logo
the glass panel at a distance from the skimmer (from the outside).
Ensure that the magnet does not strike against the glass panel!
out of the body
onto the thread in the box until it stops (
14
into the pertinent bores
(
).
100 l/h must be guaranteed. We
with
onto the
).
).
onto
Advertisement
Table of Contents
