Page 1
SNATCH STRAP MOTOR VEHICLE RECOVERY RSS08 OWNER S MA NUA L RSS11...
Page 2
ONLY attach recovery straps to an APPROVED recovery point/device that is suitably rated for use with the strap. BEFORE attempting a vehicle recovery all passengers must exit the vehicles and stand as far away as possible. bushranger.com.au...
Page 3
Note: the straps strength and stretch are significantly reduced when the strap is saturated with water. An item such as a Bushranger recovery damper, heavy bag, blanket or similar must be draped over the strap during its use to reduce unintentional rebound of the strap.
Definitions: Minimum breaking strength’ for a motor vehicle recovery strap, means the minimum load necessary to cause the strap to fail ‘motor vehicle recovery strap’ means a strap, commonly called a snatch strap, for attaching to a bogged vehicle to tow it clear of the bogged situation.
Safety & Inspection • Prior to snatching a vehicle, it is mandatory that the strap is inspected for damage, this includes; frayed materials, loose stitching, cuts and abrasions. (If any of the above are sighted, discard snatch strap). • Check the strap usage chart for number of recoveries the strap has carried out.
• Always drape an item such as a BUSHRANGER damper blanket over your snatch strap while in use. • The two vehicles should be in as close to a straight line as possible. NEVER exceed the maximum steering angle of the vehicles as this significantly increases the load on the strap(s) and the vehicles.
Page 7
Kingsley Products - Warranty Policy Our Warranty We warrant to you that the Kingsley product is free from defects in workmanship and materials for the warranty period. Fitting and use Please ensure you: fit the Kingsley product in accordance with the product information and all relevant vehicle safety and compliance laws use the Kingsley product for the purpose for which it was originally designed and in accordance with the product information and all relevant vehicle safety and compliance laws...