Advanced Bionics Neptune CI-6515 Manual page 6

Note: If recipient does not hear FM input, verify that:
1. A "Mic only" setting is NOT being used as the
mixing ratio in the active program in SoundWave.
2. The programming header switch is in the "FM"
position.
3. The FM transmitter has been synced with the FM
receiver.
• To remove the FM receiver, gently pull the FM receiver
straight out of the programming header.
Evaluating a Battery-Operated External
Audio Input Device in Fitting Mode
• With processor already attached to the Neptune pro-
gramming cable, connect the external audio input de-
vice to the 3.5mm auxiliary connector on the side of the
programming header.
• Slide the programming header switch to the "EXT" position.
5