Advanced Bionics Neptune CI-6515 Manual page 5

• Push the programming header snugly onto the sound
processor.
• Verify that the Neptune processor appears in the Sound-
Wave™ hardware tree.
Removing the Programming Cable
Press the release latch until you feel the programming
header disconnect from the Neptune sound processor.
Evaluating FM in Fitting Mode
With the processor already attached to the Neptune pro-
gramming cable, connect the Phonak MLxi receiver to the
programming cable. Take care to ensure that the size of
the FM receiver pins match the size and orientation of the
holes on the programming header Euro port connector.
• Slide the programming header switch to the "FM" position.
4