How To Set The Oven Controls; Setting The Clock; Microwave Cooking; Power Levels - Baumatic BTM25.2M Instruction Manual

HOW TO SET THE OVEN CONTROLS

BEEPS DURING OVEN SETTINGS
• ONE BEEP: Oven accepts the entry.
• TWO BEEPS: Oven does not accept the entry. Please check and try again.

SETTING THE CLOCK

1. Press and hold CLOCK/WEI.ADJ. button for 3 seconds, "H24" displays. Press this
button again, the oven turn to 12-hour system.
2. Rotate the TIME/MENU dial until the correct hour is displayed.
3. Press CLOCK/WEI.ADJ. button.
4. Rotate the TIME/MENU dial until the correct minute is displayed.
5. Press CLOCK/WEI.ADJ. button to confirm.
MICROWAVE
Microwave cooking allows you to customize cooking power and time. First, you select a power
level by pressing the POWER button a number of times (see the table below). Then you set
the cooking time by rotating the TIME/MENU dial, before pushing START.
Press POWER button to select cooking power
Press
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Suppose you want to cook for 5 minute at 60% power level:
1. Press POWER button 5 times.
2. Rotate the TIME/MENU dial until the correct cooking time is displayed.
3. Press START.
NOTE:
1. If you want to temporarily stop a cooking session, press STOP/CANCEL once and
then you can start the cooking again by pressing START; or press STOP/CANCEL twice to
cancel the cooking program altogether.
2. After the cooking time ends, the system will beep four times and END is displayed.
Before starting another cooking session, you need to clear the display and reset the system
by pressing the STOP/CANCEL button.
Power
100% (P-HI)
90% (P-90)
80% (P-80)
70% (P-70)
60% (P-60)
50% (P-50)
40% (P-40)
30% (P-30)
20% (P-20)
10% (P-10)
0% (P-00)
12
Description
High
Medium
High
Medium
Med
Low/Defrost
Low