Baumatic BF344 Instruction Manual page 21

REVERSING THE DOOR OPENING (swing of the door):
Using a star-headed screwdriver, disassemble the
10)
remainder of the top hinge assembly and keep it safely
nearby. NOTE – you will need to disturb the top console
panel as you do this.
TO REATTACH THE DOORS – Note that you must start with
the top door and proceed to the bottom door.
Lifting the top console panel, and using a small flat-
11)
head screwdriver, remove the plugs covering the holes
on the other side of the fridge's top doorway.
Screw the hinge assembly back in, noting that the
12)
position must be the reverse of its former position on
the other side of the doorway.
Once you have
13)
reattached the
washer to the pin,
attach the pin 'K' to
the hinge assembly,
noting that its
position must be such
that it will make an
exact contact with
the hinge socket ('D'
in picture on page 17)
Take the hinge socket out of the former opening
14)
side of the door's top ridge. Insert this in the hole on
the other side of the top ridge of the door.
Reattach the upper door, being careful not to let it
15)
hang loosely. Get someone else to hold the door if you
can. It is advisable to have it wide open while
performing this step.
20