Table of Contents
Advertisement
REVERSING THE DOOR OPENING (swing of the door):
Using a star-head screwdriver, remove the remainder of
3)
the hinge assembly from around where the pin had
been.
Remove the lower
4)
door by gently sliding
it out (see picture 'B')
– see diagram at
right.
Using a small flat-head screwdriver, prise the covering
5)
caps from the socket holes of the other side of the
fridge's lower side.
Now look at the middle hinge section (to which the top
6)
of the bottom door had been connected). Slide off the
hinge cover '
Carefully slide the top door free from its top hinge pin
8)
('K'), remove the hinging accessory from its bottom edge
and replace it on the opposite side with the other
hinging accessory that is provided in the plastic bag.
19
H'.
7)
9)
Disassemble the middle
C'
hinge '
using a star-head
screwdriver and remove
the middle hinge
altogether, keeping it in a
safe place nearby.
Using a flat-head
screwdriver,
disassemble the
K
upper pin '
'.
Advertisement
Table of Contents
