Page 1
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 1 MV Series - MDVR for vehicles AHD video recorders Installation manual How to install the system How to configure the functions How to connect via web with CMSV6 DSE SRL - ITALY - WWW.DSE.EU...
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 2 Contents of the manual MV video recorders are vehicle DVRs suitable for CVBS and AHD analog cameras up to 2MP (1080P). They are ideal in combination with our vehicle cameras.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 3 Package Contents The MDVR you purchased is vehicle video recorder. The package includes: 1 - MDVR VCR 2 - 3G ANTENNA, WiFI ANTENNA, GPS functions) (only in models with these...
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 4 SD card installation All DVRs in this range are designed to be able to record on SD card. To access the SD card slot you must first unlock the protective cover with the included lock key.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 5 Power connection All DVRs in this range accept power from 8 to 36VDC to adapt to any medium. The power cable is included to connect to the vehicle's electrical panel to receive power from the battery.
Page 6
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 6 The power cable is equipped with a protection fuse. DSE SRL - ITALY - WWW.DSE.EU...
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 7 Adapter cables The MDVRs use MiniDIN aviation type connectors because they are compact and equipped with a fixing ring which makes them protected against vibrations. To connect cameras, monitors, etc. the MDVRs are supplied with a set of adapter connection cables with DC (12VDC power supply), BNC (Video) and RCA (Audio) terminals.
Page 8
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 8 DSE SRL - ITALY - WWW.DSE.EU...
Page 9
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 9 LEDs and connections - MV-41 PWR - Power LED ERR - GPS system error LED - GPS status LED VLS - Video lost SD - SD card status NET - Not used...
Page 10
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 10 V IN3 V IN4 - Inputs for video-only cameras. Connect the cameras here with the included cable which provides a DC connector to power the 12VDC camera, a video BNC and an RCA that you will leave unused.
Page 11
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 11 LEDs and connections - MV-42 PWR - GPS power LED - GPS status REC - Registration NET - IR network connection - Remote control receiver SIM - Insert the data SIM for 3G / 4G SD connection - Insert the SD card or miniSD card with USB adapter - USB socket for backup DSE SRL - ITALY - WWW.DSE.EU...
Page 12
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 12 DC 8-36V - Connect red to battery positive, black to battery negative and yellow to the ACC line of the electrical panel A / V IN1 2 3 4 - Inputs for video / audio cameras. Connect the cameras here with the included cable which provides a DC connector to power the 12VDC camera, a video BNC and an RCA for any audio.
Page 13
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 13 GRAY SENSOR OUT 1,2 you can connect 2 alarm outputs between the gray cable and GND PURPLE BROWN - RS232 to connect special devices YELLOW ORANGE - RS485 for the control of motorized cameras RED - 12VDC power supply...
Page 14
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 14 Remote controller The MDVRs do not have a mouse like the desktop DVRs and are controlled with the supplied remote control. The remote control receiver is on the front of the MDVR, next to the signaling LEDs.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 15 Access to the menu To access the configuration, press the MENU button on the remote control. The factory passwords are: USER ACCESS: 888888 ADMINISTRATOR ACCESS: 999999 The aesthetics of the menu may vary according to the models, keeping the functions unchanged.
Page 16
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 16 Playback The playback button allows you to review the recordings You can search the disk (HDD) or SD card (SD) by indicating the date and time. You can also select the type of recording (ALARM or ALL) Press ENTER to play the video.
Page 17
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 17 Preview The preview button allows you to review the photos taken by the MDVR DSE SRL - ITALY - WWW.DSE.EU...
Page 18
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 18 Settings The settings button accesses the settings section which is divided into 6 sections DSE SRL - ITALY - WWW.DSE.EU...
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 19 Settings / Basic In the Settings / Basic section there are the general settings of the MDVR BASIC / TIME Here you set the time of the MDVR by setting it manually or by selecting automatic synchronization with the GPS (if...
Page 20
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 20 ADMIN - Has access to all functions BASIC / USER Here you set the data of the MDVR to identify it easily. In other parts of the program you can use this data to identify the device.
Page 21
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 21 BASIC / POWER Here you can set the switching mode of the MDVR POWER MODE - In ACC mode the MDVR turns on when voltage is applied to the ACC input. In TIMER mode the MDVR switches on and off automatically at the time indicated under ACCOFF DLY - You can set a delay in switching off after the ACC input for switching off the ignition is missing.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 22 Settings / Alarm In the Settings / Alarm section there are the settings on the operation of the alarm inputs and outputs of the MDVR ALARM / ALARM Here you can set the general settings of the alarm inputs...
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 23 ALARM / OUTPUT Here you can set the operation of the alarm outputs. You can use the COMMON default that the alarm output will automatically activate if an alarm input or event is activated. Or you can combine specific functions that can be activated by the supervision software ..
Page 24
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 24 FUNC - Selects the function SNAP - Take a picture if the SEND input is activated - Send email if the input is activated REC - Defines which channels to record if the input is triggered...
Page 25
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 25 Settings / Net In the Settings / Net section there are the network settings of the MDVR NET / MODE Here you can choose the type of network connection of the MDVR for Internet access NET MODE - Here you choose the type of web connection to use with the MDVR.
Page 26
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 26 NET / 3 / 4G If the MDVR has a SIM for cellular connection, here you can enter the connection data that you can obtain from the Internet service provider where you purchased the card...
Page 27
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 27 NET / WI-FI If your MDVR supports wifi you can connect the MDVR to a wifi network by entering the connection data here. Remember to choose WiFi or 3 / 4G + WiFI in NET MODE (see above)
Page 28
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 28 Settings / Encode In the Encode section you set the management of the video streams of the cameras connected to the inputs of the MDVR ENCODE / MAIN Here are the video data of the main stream, i.e. the main video stream that the MDVR must receive from the cameras on the various channels RES - Set the camera resolution here: D1, 720P or 1080P.
Page 29
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 29 SUB MODE - You can choose from 4 presets that automatically change the stream parameters CLARITY - High quality of the substream if you have a high performance web link BALANCE - Medium quality and support of all connections FLOW - Priority to image fluidity, to be used with low bandwidth availability.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 30 Settings / Record In the Record section you set the recording options of the MDVR RECORD / CTYPE Here you set the video format of the recording on the various channels...
Page 31
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 31 ALARM - the MDVR records when an alarm input is activated MANUAL - the MDVR records only when the command REC SD CARD is given - You can choose how to use the SD card...
Page 32
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 32 Settings / Serial In the Serial section you can configure the RS232 and RS485 serial lines that you can connect to the MDVR between the auxiliary inputs to control any motorized analog cameras. You can set the protocol speed and protocol type; Pelco-D or Pelco-P.
Page 33
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 33 Tools The last button in the configuration menu is the tools button which contains a number of useful tools LOG - You can search the MDVR event log DISK - Contains information on memory drives, Hard Disks and SD cards and allows you to format them...
Page 34
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 34 4G connection ( MV-42HD-4G) The 4G MDVRs of this range allow you to insert a 4G data SIM for remote control. These MDVRs support the CMSV6 vehicle supervision platform. You can download from our site the...
Page 35
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 35 the files. You can also geolocate your vehicles on a map. The connection is made through the cellular Internet thanks to the CMSV6 P2P cloud server that works with any mobile provider.
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 36 139.9.251.220 USER / PASSWORD - Ask our helpdesk for the access credentials associated with your MDVR by sending an email with the ID of your MDVR to service.clienti@dseitalia.it The login credentials we will provide you for the CMSV6 software are the same that you can use in the CMSV6 smartphone app, which you can download from Google Play or Apple Store.
Page 37
INSTALLATION MANUAL MV SERIES - MDVR for vehicles Page: 37 If, on the other hand, you see the IP of the server on the screen, this means that the connection has been made DSE SRL - ITALY - WWW.DSE.EU...
Need help?
Do you have a question about the MV Series and is the answer not in the manual?
Questions and answers