Rotary Commander Rm-X4S - Sony CDX-GT820IP Operating Instructions Manual

Locating a disc by name — LIST
You can select a disc from the list when a CD
changer with CD TEXT capability, or MD
changer is connected.
If you assign a name to a disc, the name appears
on the list.
1 During playback, press
The disc number or disc name appears.
2 Rotate the control dial until the desired disc
appears.
3 Press the select button to play the disc.
The display returns to normal play mode.

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SO U N D
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SOUND
PRESET/
DISC
SOURCE
VOL
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• PRESET/DISC control
CD/MD: The same as (3)/(4) (ALBUM –/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate)
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).
18
(LIST).
D S P L
M O D E
S O U N D
ATT
MODE
DSPL
SEEK/AMS OFF
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SOUND).
To decrease