Accessories/Spare Parts - WAGNER Pump-Runner Operating Manual

Pump-Runner
3. Change of workplace
1) Fill the Pump-Runner reservoir with about 1.5 litres of water
up to the marking on the inside and close it.
For horizontal transport, the small opening in
the lid with the return hose must be closed.
Cleaning the Pump-Runner
The Pump-Runner is only solvent resistant
to a limited extent.
Do not place seals in solvent, just wipe
them.
Attention
1) Flush out the reservoir with warm water and commercial
household cleaner.
2) Flush out the reservoir with warm water and commercial
household cleaner.
3) Thoroughly clean the catches to guarantee a seal.
4) Wipe the outside of the Pump-Runner if required.

Accessories/Spare parts

Order Description
Ref.
0508 620 EasyClean cleaning and conservation agent
118 ml
2303 130 Lid complete inc. internal seal, return hose seal
and hose clip
2303 125 Reservoir complete inc. catch set
GB
7