feelSpace naviBelt User Manual page 7

Charge level
To check the battery charge level, press the On/Off button briefly
(<1 second) with the belt switched on. Depending on the charge
level, a vibration signal moves clockwise around the abdomen
completely or partially and ends with a double vibration pulse.
e.g. full charge: signal moves completely around the abdomen,
half charge: signal moves only up to half around the abdomen,
etc.
Pause
A short press of the pause button pauses the vibration signal.
Press the pause button again to end the pause.
Favorite
Briefly pressing the Favorite button starts or ends navigation to a
saved location. This function can only be used if a Bluetooth
connection to the smartphone exists and a favorite has been
determined via the feelSpace app. Otherwise, there is a short
special tactile warning signal (page 11).
Compass
Briefly pressing the compass button starts or ends the compass
mode. The vibration unit in the belt vibrates and points in the
direction of the magnetic north.
Increase intensity
You can change the intensity of the vibration in pause mode.
First, press the pause button.
Now, press the compass button. If you hold down the key, the
intensity increases continuously until the maximum is reached. If
you want to increase the intensity step by step, press the key
repeatedly short (small steps) or long (larger steps). A tactile
feedback on the sides informs you about the selected intensity.
A double pulse on the sides indicates that the maximum intensity
is reached.
Press the pause button again to exit the pause mode.
5