Table of Contents
Advertisement
i)
Delete a favorite. Click on the star at the bottom left. Confirm the deletion in
the window that pops up.
j)
In the settings you can switch on or off the option to display a localization track
graphically. The localization track indicates where you've been walking. In the
settings you can also adjust the intensity of the vibration, check the level of
charge of the naviBelt, see the current app version and the naviBelt firmware
version.
k)
In the section information you can learn more about the app and how to use it.
l)
Note: The app will be extended in the future and its appearance may change.
Currently, it displays the beeline to the destination for navigation. The updated
user manual can then be found within the app under Information
Charging
Charge the naviBelt before the first use.
Use the supplied power cable. Insert the
micro-USB plug of the power cable into
the micro-USB socket at the top of the
control unit. The control unit is in the
pocket of the belt. You can reach the
socket from the outside through an
opening in the pocket. See illustration.
When the belt is switched on during the
charging process, it gives acoustic
feedback. When fully charged, you hear a
sequence of 3 short beeps in ascending pitch. Press the pause button to stop the
vibrating ready signal when the belt is switched on, this reduces the power
consumption during the charging process.
Note on the battery:
The battery is only charged when the temperature is in the range between 5°C and
40°C.
Charging time depends on the charging current supplied by a USB power cable or
your PC. When the battery is completely discharged, the charging time at the USB
connection of a PC (500 mA) is approx. 5 hours, and approx. 3.5 hours via the power
cable.
9
Advertisement
Table of Contents
