Image Stabilizer - Canon RF100mm F2.8 L MACRO IS USM Instructions Manual

6. Image Stabilizer

This function provides image stabilization
appropriate for shooting conditions (such as
shooting still subjects, panning shots, and
closeup (macro) shooting).
Set the image stabilizer switch to ON when you
want to use the Image Stabilizer.
Set the image stabilizer switch to OFF when
z
you are not going to use the Image Stabilizer.
The shorter the focusing distance is, the less the
z
image stabilizer effect.
The Image Stabilizer cannot compensate for a
z
blurred shot caused by a subject that moved.
The Image Stabilizer may not be fully effective if
z
you shoot from a violently shaking vehicle or other
transportation.
When using a tripod, it is recommended that you
z
set the image stabilizer switch to OFF.
Even with a monopod, the Image Stabilizer will
z
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.
When shooting a still subject, it compensates for
z
camera shake in all directions.
It compensates for vertical camera shake during
z
panning shots in a horizontal direction, and
compensates for horizontal camera shake during
panning shots in a vertical direction.
ENG-11