Table of Contents
Advertisement
4. Zooming
To zoom, turn the lens' zoom ring.
Be sure to finish zooming before focusing.
z
Zooming after focusing can affect the focus.
Blurring may temporarily occur if the zoom ring is
z
quickly turned.
Please be careful not to let your fingers get
z
caught in between the lens' front and the focusing/
control ring when zooming.
5. Image Stabilizer
This function provides image stabilization
appropriate for shooting conditions (such as
shooting still subjects and panning shots).
The Image Stabilizer is turned ON and OFF with
the camera settings. Please refer to the camera's
instructions for details.
The Image Stabilizer cannot compensate for a
z
blurred shot caused by a subject that moved.
The Image Stabilizer may not be fully effective if you shoot
z
from a violently shaking vehicle or other transportation.
If using a camera that allows you to change
z
the shutter mode setting, [Elec. 1st-curtain] or
[Electronic] settings is recommended* to allow the
Image Stabilizer to be fully effective.
* When using an EOS R camera, select either [Mode 1]
(default factory setting) or [Mode 2] in the [Silent LV shoot.]
settings, or select [Enable] in the [Silent shutter] settings.
When using a tripod, it is recommended that the
z
image stabilizer is set at OFF.
Even with a monopod, the Image Stabilizer will be
z
as effective as during hand-held shooting. However,
depending on the shooting conditions, there are cases in
which the Image Stabilizer effect may be less effective.
The Image Stabilizer will work in combination with
z
cameras with in-body Image Stabilizer.
ENG-12
Advertisement
Table of Contents
