BT/WIFI Problem
Step
Confirm the defect symptom
1
(Check the turned on BT/WIFI & connected device)
Check the BT/WIFI Ant. & Ant contact.
2
(Rear cover Ant. & ANT202, ANT203)
Check the voltage of C233
3
Notice. It should be measured when the BT/WIFI
path is activated on
Check the clock of C250, C251
4
Notice. It should be measured when the BT/WIFI
path is activated on
© Samsung Electronics Co., LTD |
Check point
Confidential
Result value
Turned on
Turned off
Broken, dust, corrosion
Normal
C233 = 1.8V
If not the correct value
C250, C251 = 37Mhz
(Same signal compared
with a good PBA)
If not the correct value
Defect point
Go to the next step
Turn on
BT/WIFI Ant &
ANT202, ANT203
Go to the next step
Go to the next step
PMIC (U701)
BT/WIFI IC (U203)
OSC201
33