RF(GSM/WCDMA)
Step
Confirm the defect symptom
1
(Make a call, check the debug screen *#0011# )
Check the settings
2
(airplane mode, Mobile networks)
3
Check the status of main ANT and Antenna clip
Check the status(crack, missing, Corrosion..etc)
of RF components.
F100(Antenna Switch Module)
4
F101(SAW Duplexer)
PAM100(Power Amplifier Module)
ANT100, ANT101(Antenna contact clip)
U100(Transceiver)
OSC100(DCXO)
© Samsung Electronics Co., LTD |
Check point
Confidential
Result value
-
Abnormal
Normal
Broken, dust, corrosion
No insert
Normal
Abnormal status
(compared with a good PBA)
Normal status
(compared with a good PBA)
Defect point
-
Settings
Go to the next step
Main ant, Antenna Clip
Go to the next step
RF components.
CP(Call Processor)
(UCP300)
25