Assembly Instructions - Kobalt KPW-1500 Manual

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): Phillips screwdriver

ASSEMBLY INSTRUCTIONS

Power Unit Assembly
1. Install handle (B) to power washer unit (C).
Secure with screws (AA).
Note: DO NOT use a power screwdriver. When
the screw is completely tight, give a small final
clockwise twist of the screwdriver.
DO NOT overtighten.
Hardware Used
AA
Screw
2. Slide spray gun holder (A) onto left side of
power washer unit (C) as shown.
Note: This step does not require any screws.
1
x 2
2
A
6
B
AA
C
C
OFF/O
ON/I
1500 PSI
kobalttools.com