Software Configuration Setting - Kenwood KCA-HX7C Instruction Manual

Motorcycle bluetooth camera and communication system
Hide thumbs Also See for KCA-HX7C:
Table of Contents

Advertisement

Software Configuration Setting

You can change the settings of the headset through the Intercom Device
Manager for KENWOOD or the Intercom Utility for KENWOOD.
Ñ
[Auto Start Recording] (Default: Enable)
If [Auto Start Recording] is enabled, the camera turns on and video recording
starts automatically when the main unit is turned on.
If [Auto Start Recording] is disabled, tap the Camera button to activate the
camera, then press and hold the Camera button for 1 second to start video
recording.
Ñ
Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
Ñ
Audio Source Priority (Default: Intercom)
Audio Source Priority allows you to select the priority between the intercom and
music (which includes GPS app instructions and message notifications) from a
smartphone. If the intercom is selected as the audio source priority, your music
will be interrupted during an intercom conversation. If music is selected as the
audio source priority, intercom conversations will be interrupted while your music
is heard.
NOTE
• Audio Source Priority is active only when Audio Multitasking is disabled.
28
CONFIGURATION SETTING
Ñ
Audio Boost (Default: Enable)
Enabling Audio Boost increases the overall maximum volume. Disabling Audio
Boost reduces the overall maximum volume, but delivers more balanced sound.
Ñ
VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When you hear a
ringtone for an incoming call, you can answer the phone by saying a word such as
"Hello" loudly or by blowing air into the microphone. VOX phone is temporarily
disabled if you are connected to intercom. If this feature is disabled, you have to
tap the Phone Button to answer an incoming call.
Ñ
VOX Intercom (Default: Disable)
If this feature is enabled, you can initiate an intercom conversation with the last
connected intercom friend by voice. When you want to start intercom, say a word
such as "Hello" loudly or blow air into the microphone. If you start an intercom
conversation by voice, the intercom terminates automatically when you and
your intercom friend remain silent for 20 seconds. However, if you manually start
an intercom conversation by tapping the Jog Dial, you have to terminate the
intercom conversation manually. However, if you start intercom by voice and end
it manually by tapping the Jog Dial, you will not be able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial to restart the intercom. This
is to prevent repeated unintentional intercom connections by strong wind noise.
After rebooting the headset, you can start intercom by voice again.

Advertisement

Table of Contents
loading

Table of Contents