CONFIGURATION SETTING
Headset Configuration Setting
1
To enter into configuration menu, press and hold the Jog Dial for 10
seconds until you will hear a voice prompt, "Configuration menu".
2
Rotate the Jog Dial clockwise or counter clockwise to navigate between
the menus. You will hear voice prompts for each menu item.
3
You can execute the command by tapping the Phone Button.
Configuration Menu
Delete All Pairings
Remote Control Pairing
Universal Intercom Pairing
Exit Configuration
Tap Phone Button
Execute
Execute
Execute
Execute
Ñ
Remote Control Pairing
You can remotely control the headset using Sena Remote Control devices.
1
Turn on the headset and the Remote Control device.
2
Execute Remote Control Pairing.
3
Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing mode.
27
English