Advertisement
Quick Links
Aluminum door
frame with
dead latch in-
stalled.
Fig 1
Alignment for the
drill guide is
achieved with the
use of our HIT-22
mortise cylinder
alignment tool.
This devise will
mount in the
mortise cylinder
hole.
Fig 3
Directions for HIT-32AL3 Drill Guide
For Alarm Lock DL1200 Trilogy
1825 Via Burton
Anaheim, CA 92806
714-772-5202 / fax 714-772-2302
www.majormfg.com
mail@majormfg.com
Remove faceplate
and all inside and
outside hardware
Fig 2
Hit-22 installed
and held in place
with the mortise
cylinder set
screw. Note:
Alignment pin
shown in guide,
this will first go
through the HIT-
32 drill guide
then into the
HIT-22.
Fig 4
Advertisement
Related Manuals for Major Manufacturing DL1200 Trilogy
Summary of Contents for Major Manufacturing DL1200 Trilogy
- Page 1 1825 Via Burton Anaheim, CA 92806 714-772-5202 / fax 714-772-2302 www.majormfg.com mail@majormfg.com Directions for HIT-32AL3 Drill Guide For Alarm Lock DL1200 Trilogy Aluminum door Remove faceplate frame with and all inside and dead latch in- outside hardware stalled. Fig 1...
- Page 2 ENGRAVING Using a combina- Use the drill screws tion square, that were supplied square the drill with the guide and guide to door. The attach one using an backset will auto- electric drill. NOTE: A matically be drill with a clutch drive centered with the is a big help, you do HIT-22.
- Page 3 Completed installation.