OK International CW1-RC Series Operation Manual page 24

CW-1RC SERIES CHECKWEIGHER
PROCESS TIMERS
{BOX STOP POSITION DELAY (CHECKWEIGH)} Press to enter the time in
seconds when the scale conveyor will stop after the case blocks the "Case in
Checkweigh Position" photoeye. Set such that the case stops in the center of the
scale conveyor.
{STABILIZATION DELAY} Press to enter the time in seconds after the scale
conveyor stops when new case enters checkweigh position before the final weight
reading is measured. This allows the conveyor to stop and stabilize before taking
weight reading.
{BOX STOP POSITION DELAY (REJECT)} Press to enter the time in seconds
when the reject conveyor will stop after the case blocks the "Case in Reject Position"
photoeye. Set so that the case stops centered to the reject pusher.
24