Honeywell LP1501 Installation And Configuration Manual page 20

PW7K1ICE Wiring and Setup
Jumper Configuration
2.3 Jumper Configuration
Figure 2-2: J3 Jumper Location
Table 2-2: Jumper Settings
Jumper
J1
J3
J4
J5
J6
J7
J8
20 www.honeywell.com
Set at Description
N/A Factory Use Only
PoE PW7K1ICE powered from the Ethernet connection
12V PW7K1ICE powered from an external 12VDC power source
connected to TB4-3 (VIN), TB4-4 (GND)
N/A Factory Use Only
N/A Micro USB Port(2.0)
N/A 10 Base-T/100Base-Tx Ethernet Connection (Port 0)
Cabinet Tamper: normally open switch
N/A Micro SD Card