Radio; Storing And Receiving Stations - Sony CDX-GT40UW Operating Instructions Manual

 OFF button
To turn off the power; stop the source.
 SOURCE button
To turn on the power; change the
source (Radio/CD/USB/AUX).
  ()/ () buttons
To control Radio/CD/USB, the same as
 –/+ on the unit.
Setup, sound setting, etc., can be
operated by  .

(BACK) button
 ENTER button
To apply a setting.
 PTY button
 VOL (volume) +*/– button
 ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
 MODE button
Press to select the radio band (FM/AM).
 SOUND/MENU button
To enter sound setting (press); enter
menu (press and hold).

(BROWSE) button
  (+)/ (–) buttons
To control CD/USB, the same as /
 (ALBUM /) on the unit.
Setup, sound setting, etc., can be
operated by  .
 DSPL/SCRL button
 Number buttons
To receive stored stations (press); store
stations (press and hold).
To pause playback (press ).
* This button has a tactile dot.

Radio

Storing and receiving
stations
Caution
When tuning in stations while driving, use
Best Tuning Memory (BTM) to prevent an
accident.
Storing automatically — BTM
Press  repeatedly until
1
"TUNER" appears.
To change the band, press 
repeatedly. You can select from FM1,
FM2, FM3, AM1 or AM2.
2
Press and hold the select button.
The setup display appears.
3
Rotate the control dial until "BTM"
appears, then press it.
The unit stores stations in order of
frequency on the number buttons.
Storing manually
1
While receiving the station that you
want to store, press and hold a number
button ( to ) until "MEM"
appears.
Receiving the stored stations
1
Select the band, then press a number
button ( to ).
7