Jeep Unconnect User Manual page 55

54 UCONNECT MODES
Two Active Phones Button
While Enable Two Phones setting is active, both
phones will be displayed as connected in the
Device Manager. A tab at the bottom of the
screen will also show the two connected
phones. Select one of the two phones; it will
highlight and that device's phonebook will
become active. To switch active phonebooks,
select the other device. If the nonactive phone
receives a call and you answer it, that phone will
become the active phone. Once the call is
complete, it will revert back to being the
nonactive phone.
After you have finished pairing a new
smartphone, Enable Two Phones option is
active, and a smartphone is already connected,
the Uconnect system will connect the newly
paired smartphone as the second device. If two
devices are already connected, the Uconnect
system will give you the option to replace one of
the devices with the newly paired one.
NOTE:
A device set as Favorite 1 option will have
priority over a device set as Favorite 2 option or
any other paired devices. When using Voice
Recognition (VR), the active phone will receive
the VR commands.
Do Not Disturb
With Do Not Disturb, you can disable
notifications from incoming calls and texts,
allowing you to keep your eyes on the road and
hands on the wheel. For your convenience,
there is a counter display to keep track of your
missed calls and text messages while Do Not
Disturb is active.
Do Not Disturb
Do Not Disturb