Jeep Unconnect User Manual page 100

Guidance View
1 — Switch View Button
2 — Current Location
3 — Route Bar
4 — Speed Panel
5 — Options Button
1 — Switch View Button
Select the Switch View button to change
between the Map View and the Guidance View.
2 — Current Location
This symbol shows your current location. Press
this symbol, or the speed panel, to mark your
current location.
3 — Route Bar
The Route Bar is shown when you have planned
a route. The Route Bar contains arrival
information, such as the estimated time of
arrival, the length of time to drive to the
destination from your current location, and
information about the next stop, if you have
stops on your route. The bottom of the Route
Bar represents your current location and shows
the distance to the next stop on your route.
NAVIGATION MODE — IF EQUIPPED
4 — Speed Panel
Press this button to view the following
information (if available):
The speed limit at your location

The name of the street you are driving on

NOTE:
If you drive more than 3 mph (5 km/h) over the
speed limit, the Speed Panel turns red. If you
drive less than 3 mph (5 km/h) over the speed
limit, the Speed Panel turns orange.
5 — Options Panel
Press this button to view the following
information:
The direction of your next turn

The distance to your next turn

Lane guidance at some intersections

99
4