Jeep Unconnect User Manual page 48

2. Press the Phone button.
NOTE:
If there are no phones currently

connected with the system, a pop-up will
appear asking if you would like to pair a
mobile phone.
This pop-up only appears when the user

enters Phone Mode and no other
device(s) have previously been paired. If
the system has a phone previously
paired, even if no phone is currently
connected with the system, this pop-up
will not appear.
3. Select "Yes" to begin the pairing process.
4. Search for available devices on your
Bluetooth®-enabled device.
Searching For Bluetooth® Devices
Searching For Bluetooth® Devices
UCONNECT MODES
Access your device's settings.

Ensure Bluetooth® in enabled. Once

enabled, the device will begin to search
for Bluetooth® connections.
5. If "No" is selected, and you still would like to
pair a device, press the Device Manager
button.
Press the Add Device button.

Search for available connections on your

Bluetooth®-enabled device (see below).
When prompted on the phone, select
"Uconnect" and accept the connection
request.
6. An in-progress screen will display while the
system is connecting.
47
2