Advertisement
Thank you for purchasing this product. Please read the instructions and check pack
Pre-assembly
contents carefully before starting assembly of this product. A full checklist of
preparation
components is given in this leaflet. If any components are missing please contact
John Lewis and partners customer services.
This product will take 1 person approximately 30 minutes to assemble.
The fitting pack contains small items which could present a choking hazard and should
be KEPT AWAY FROM YOUNG CHILDREN.
Read this leafl et in full before commencing assembly.
Phillips head
screwdriver required
Fittings and parts
No. Picture
checklist
A
C
1. We suggest you spend a short time reading through this leafl et and then follow
Helpful advice
the simple step by step instructions.
before you begin
2. Do not discard any of the packaging until you have checked that you have all the
3. Assemble this product on a soft surface.
4.
tightened during initial assembly. Only upon completion of the assembly should all
5.
fully tightened.
Keep out of reach of small children. It contains small parts which might present a
6.
choking hazard.
7. Do not use any other tools other than those recommended to build this product.
Name
Qty
No. Picture
Name
Side
2
B
Shelf
Frame
Top
D
1
Screw
Board
Assembly instructions
A
Qty
C
2
Step 2 Repeat step 1 and finish installing the other
12
side frame (A).
D
Step 1 Affix the top board (C) to one piece of
side frame (A) using two screws (D).
Repeat the process and finish installing
two lower shelves (B) with two screws (D)
for each shelf.
B
A
C
Step 3 Ensure unit is secure before use.
D
B
A
Advertisement
