BETAFPV Cetus FPV Kit Manual page 30

l Lightly press the BIND button on the back of the remote control radio transmitter with
a screwdriver. The power indicator will flash red;
l If re-bind is successful, quadcopter status light will change to blue.
Note: The re-binding of the remote control radio transmitter and the quadcopter may not be
successful after pressing the BIND button of the remote control radio transmitter once. In this
situation, pilot needs
Quadcopter Level Calibration
After the quadcopter
become offset. This will cause the quadcopter to always tilt in the same direction
To fix up it, the quadcopter
l Turn on the quadcopter and the
connection is successful;
l Place the quadcopter on a horizontal plane;
l Enter the quadcopter's OSD menu
to press the BIND button a second time to complete the binding.
has taken off and landed several times, the
gyroscope can be recalibrated. The steps are as follows:
remote control radio transmitter, and
(Refer "OSD Menu Operation");
quadcopter gyroscope may
during a
ensure that the
flight.