Connect The Cables; Aerial; Loudspeakers; Auxiliary Equipment - Bang & Olufsen BeoSound 3200 User Manual

Bang & olufsen beosound 3200 cd tuners: user guide
Hide thumbs Also See for BeoSound 3200:
Table of Contents

Advertisement

Use the diagram and the graphics
imprinted on the socket panel for
reference when locating the sockets.
Do not connect the music system to
the mains until you have finished the
setting-up procedure!
You can use your music system in a
standalone setup or connected to a Bang &
Olufsen video system using the Master Link
cable. The Master Link socket on the back
of the music system can also be used for
BeoLink
®
distribution. The BeoLink system
allows you to listen to the music system in
any room you like via extra speakers*.
*NOTE! Please contact a Bang & Olufsen
retailer for further information about the
BeoLink system and information on auxiliary
equipment.

Connect the cables

AM aerial
FM aerial
Mains supply

Aerial

Connect your FM aerial to the socket marked FM
and your AM aerial, if any, to the socket marked
AM.
When using an AM loop aerial, tune in to the
radio station you want, then turn the aerial
horisontally until you receive the best possible
signal.

Loudspeakers

Connect your active speakers to the sockets
marked POWER LINK.
You may choose to loop the signals through from
speaker to speaker, or you may connect one
speaker to each of the two sockets. Refer to the
User's guide for your BeoLab loudspeakers.
Remember to set the L • R • LINE switch on the
BeoLab speakers to L and R (left and right),
respectively.
If you wish to connect the BeoLab 2500
loudspeakers, refer to Guides supplied with the
speakers.
Auxiliary
equipment
Loudspeakers
BeoLink connection

Auxiliary equipment

Connect your auxiliary equipment to the socket
marked AUX. This socket enables you to use
compatible Bang & Olufsen equipment, such as an
audio tape recorder or a record player. Please note
that equipment connected to this socket cannot
be operated by remote control. The socket may
also accommodate equipment of other makes.
BeoLink connection
The socket marked MASTER LINK should be used
when you connect your music system and a
compatible Bang & Olufsen video system.
Mains supply
Plug the mains lead into the socket marked
the music system but do not connect it to the
mains yet.
27
~
, on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents