Lexicon - Bang & Olufsen Beo4 Reference Manual

16
A
ADD? Appears as an option in the Beo4 setup
mode. Enables you to add extra "buttons" to
the Beo4 display. Access the Beo4 setup mode
and call up ADD?, press GO and start to reveal
the "buttons" you can add – press GO to add
the "button" currently displayed as the first
extra "button" when you press LIST – or press
e.g. 3 to place it as number 3 in the list of all
your extra "buttons".
AUDIO? For selecting an Audio product setup for
Beo4. Product setups BS9000 and BASIC are
available.
AV Indicates that the audio/video function is
activated, transferring e.g. TV sound to the
speakers connected to an audio system or vice
versa. This only applies if your Video and Audio
system is interconnected.
AVANT Indicates the Beo4 Video product setup
dedicated to BeoVision Avant.
AVANTUS Indicates the Beo4 Video product setup
dedicated to the BeoVision Avant US version.
AV5 Indicates the Beo4 Video product setup
dedicated to BeoCenter AV5.
AV9000 Indicates the Beo4 Video product setup
dedicated to BeoSystem AV9000.
A.OPT (audio option) For programming a system
setup for audio systems. Please refer to
OPTION? for a further explanation
A.SETUP (audio setup) Gives access to a list of
extra "buttons" required for sound adjustment
of certain Bang & Olufsen audio systems,
A.SETUP must be added in order to be able to
reveal the following "buttons" for sound
adjustment:
BASS – gives access to adjusting Bass levels for
an audio system.
TREBLE – gives access to adjusting Treble levels
for an audio system.
LOUDNSS (loudness) – Gives access to setting
Loudness to On or Off, please refer to
LOUDNSS for further information.
S.STORE (Sound Store) – gives access to storing
sound adjustments, please see S.STORE for
further information.
B E O 4 L E X I C O N ...
A.TAPE (audio tape recorder) Appears in the
display when you press the Beo4 A TAPE
button. Any operation you carry out on the
Beo4 will be directed to your Bang & Olufsen
audio tape recorder.
A.TAPE2 (audio tape recorder 2) For switching on
a second audio tape recorder connected to
your Bang & Olufsen audio system.
A.AUX (audio auxiliary source) For switching on
any extra equipment connected to your Bang &
Olufsen audio system.
B
BASIC Indicates the Beo4 Audio product setup for
all Bang & Olufsen audio systems other than
BeoSound 9000
BASS For sound adjustment of bass levels in
certain Bang & Olufsen systems. In order to get
access to BASS you must add either A.SETUP or
V.SETUP as appropriate. If you wish to store
sound adjustments, refer to S.STORE (Sound
Store) for further information.
BATTERY Indicates that it is time to change the
batteries in the Beo4 remote control.
BC1 Indicates a dedicated Beo4 Video product
setup. For future use.
BV1 Indicates a dedicated Beo4 Video product
setup. For future use.
BS9000 Indicates the Beo4 Audio product setup
dedicated to BeoSound 9000.
C
CAMCORD (Camcorder) For selection of
CamCorder input on Bang & Olufsen video
systems.
CD (compact disc player) Appears in the display
when you press the Beo4 CD button. Any
operation you carry out on the Beo4 will be
directed to your Bang & Olufsen CD player.
CD2 (compact disc player 2) For switching on a
second CD player in certain Bang & Olufsen
audio systems.
CDV (compact disc video player) For switching on
to a compact disc video player connected to
your Bang & Olufsen video system.