Operating Beocord V 8000; Beocord V 8000 Close-Up Operation - Bang & Olufsen BeoCord V 8000 User Manual

6
> Operating BeoCord V 8000

BeoCord V 8000 close-up operation

The five buttons on the front of the
BeoCord V 8000 allow you to operate
some of the functions available in the
BeoCord V 8000...
Note: The Beo4 remote control is a requirement
for complete operation of the BeoCord V 8000.
Complete operation is, though, also available via
a Beolink 1000 remote control, see pages 26-27
for further instruction.
EJECT
Unloads the videotape cassette you have loaded
into the BeoCord V 8000.
s s
s s
Press to fast rewind a videotape.
PLAY
Switches on the BeoCord V 8000 and starts
playing the tape you have loaded.
t t
t t
Press to fast forward a videotape.
G
Press briefly to stop playback or recording. Press
for more than 3 seconds to switch the BeoCord
V 8000 to standby.
EJECT
Loading a tape
Tapes must be loaded into the compartment just
above the close-up operation panel.
Load the cassette so that the small arrow on top
of the cassette is visible and points toward the
compartment opening. Push the cassette through
the door until you feel the mechanism drawing it
all the way into the compartment.
The Display...
TIMER... indicates that a Timer recording has been
programmed into the V 8000. If a Timer recording
is unable to be executed, it flashes on and off.
RECORD... indicates that a recording has started.
When V 8000 is switched to recording pause, it
flashes on and off.
PDC... Indicates that the PDC (Program Delivery
Control) function is activated – may appear in
connection with a Timer recording made via
BeoCord's own menu.
VPS... Indicates that the VPS (Video Programming
System) function is activated – may appear in
connection with a Timer recording made via
BeoCord's own menu.
TIMER TIMER
PLAY
G
(Standby indicator)...
The red standby indicator appears in the display
when the BeoCord V 8000 is switched to standby.
2.35... indicates the counter position on the tape:
time used or time left (see pages 14-15 for further
information).
During regular playback, winding and recording,
the display indicates your current counter position
on the tape. Track indication is also available.
Otherwise, the BeoCord V 8000 display acts as a
status display and provides you with information
about the operation or function currently in
progress.
RECORD RECORD PDC PDC VPS VPS