Recording; Timer Recording - Bang & Olufsen BeoCord V 8000 User Manual

16
Press to switch on the videotape
V TAPE
recorder
then
Press to call up the V 8000 main
MENU
menu
then
Press to call up the Timer recording
GO
menu
The TIMER RECORD menu appears...
Press to move from item to item in
the menu
or
then
Press to reveal options for an item
t t
or
s s
or
Use the number keys to key in
0
values, e.g. program number, start
through
and stop times, and date
9
To store your Timer recording...
Press to store it
GO
Press STOP at any time to leave the menu without
storing the information you entered
Your stored Timer recording now
appears in the RECORD LIST...
To make a weekly Timer recording...
Select source, program number, start
and stop times...
then
Press until DATE is lit up
then
Press to switch from DATE to DAYS
0
then
Press to be able to select days
t t
Continue on the next page...
R E C O R D I N G

Timer recording

MENU
TIMER RECORD
SETUP
CAMCORDER
The V 8000 main menu
TIMER RECORD
SOURCE TV
PROGRAM 1
START 20:00
STOP 21:00
DATE MON 10 NOV
RECORD LIST
. . .
The menu for programming Timer recordings
TIMER RECORD
SOURCE . . .
PROGRAM . . .
START . . .
STOP . . .
DATE . . .
RECORD LIST
TV1 18:30–19:30
WED 1 MAR
>>
: CLEAR
The Timer recording menu. A Timer recording is
stored for TV program number 1, starting at half
past six in the evening, on Wednesday the 1st of
March.
You can make BeoCord V 8000 record
the available sources or programmes,
at any time you specify. It will start and
stop the recording automatically.
You can make a Timer recording which
takes place once (DATE), or on certain
days of the week (DAYS). You could
record a programme which is
broadcast, at the same time, every or
certain days of the week.
Your stored Timer recordings are listed
in the RECORD LIST, shown on the
same menu.
Clearing or editing Timer
recordings...
In the RECORD LIST, you can edit or
clear your Timer recordings. If you wish
to clear a Timer recording at a later
date, call up the Timer recording menu,
and clear the recording in question.
Please note: If your Timer recordings overlap, it is
indicated in the RECORD LIST – OVERLAP appears
as the headline over the list. An exclamation mark
indicates the Timers which overlap.