On-Screen Status Displays - Bang & Olufsen BeoCord V 8000 User Manual

24
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
V. TAPE
O N - S C R E E N
As soon as the BeoCord V 8000 starts
carrying out your instructions, a small
status display appears at the bottom of
the TV screen.
The display prompts you to load a tape before
LOAD
you can start playback.
The video tape is playing – it has been playing for
PLAY 2:15
2 hours and 15 minutes or 2 hours and 15 minutes
of playing time remains on the tape.
You have pressed a number key while the tape is
PLAY –:–2
playing and are going to key in a counter position
you want to go to.
The videotape is playing – you have selected the
PLAY MONO
mono (linear) sound track
You have pressed the yellow button on Beo4 to
>
CUE 2: 15
cue forward through the tape.
You have pressed the green button on Beo4 to
<
CUE 2: 15
cue backwards through the tape.
You have pressed the blue button on Beo4 to cue
>
SLOW 2:15
forward in slow motion through the tape.
You have pressed the red button on Beo4 to cue
<
SLOW 2: 15
backwards in slow motion through the tape.
You have pressed the
>>
2: 15
the tape.
You have pressed the
<<
2:15
tape.
S T A T U S D I S P L A Y S
t t
button to fast forward
s s
button to rewind the
The status display shows what the
videotape recorder is doing...
Note: For further information about the time
used/left counter indication, see page 14-15.