Play-Fi Wireless Surround Mode; Settings; Adjust Speaker Level; Set Display Brightness - Philips Fidelio B97 User Manual

Play-Fi wireless surround mode

With DTS Play-Fi, your soundbar can be paired
with multiple Play-Fi enabled speakers as wireless
surround speakers. You can wirelessly listen to
the same music in every room of your house.
Note
•
The wireless surround mode is set up via the Play-Fi
app.
•
Play-Fi wireless surround mode is primarily used for
HDMI and ARC audio sources.
•
In wireless surround mode, the front channel audio of
the soundbar may be delayed up to 150ms, therefore
this mode is not suitable for gaming where low audio
and video latencies are desired.
You can cast music stream to this soundbar via
Apps / OS
• Play-Fi app
• Spotify app
• Chromecast enabled apps
• AirPlay2 (iOS devices)
Voice
• Google Assistant GoogleCast for Audio
• Alexa
• Siri
• Cast from apps that supports GoogleCast
for Audio
15 EN

5 Settings

Adjust speaker level

Repeatedly press
select the speakers below and press the left and
right navigation buttons to adjust the speaker
level
• FRT L (front left speaker)
• FRT R (front right speaker)
• CTR (center speaker)
• TOP L (top left speaker)
• TOP R (top right speaker)
• SIDE L (side left speaker)
• SIDE R (side right speaker)
• SBW (subwoofer)

Set display brightness

Repeatedly press
menu, select DIM and press the left and right
navigation buttons to adjust the brightness level
of the display panel on this product.
• HIGH (high)
• MID (medium)
• LOW (low)
Display auto off
Repeatedly press
menu, select DISP and press the left and right
navigation buttons to select DISP ON or DISP
OFF.
to enter the settings menu,
to enter the settings
to enter the settings