Table of Contents
Advertisement
•
DO NOT puncture the rechargeable battery with any objects, subject it to severe shocks, or throw it.
Damage to the rechargeable battery's protection circuit could cause the rechargeable battery to be
recharged at an abnormal current/voltage or cause an abnormal chemical reaction within the
rechargeable battery.
•
DO NOT leave a drained rechargeable battery in your Label Printer for a long period of time. This could
shorten the life of the rechargeable battery or lead to an electrical short.
•
If liquid from the battery gets onto skin or clothes, immediately rinse them with water.
•
Use ONLY the PA-BT-003 rechargeable battery with this Label Printer. Use of any other battery type may
cause an explosion.
•
Dispose of batteries at an appropriate collection point. Be sure to observe all applicable local regulations.
•
If your Label Printer can only be used for a short period of time, even though the rechargeable battery is
fully charged, the rechargeable battery may have reached the end of its service life. Replace the
rechargeable battery with a new one. When removing and replacing the rechargeable battery, cover the
terminals of the old rechargeable battery with tape to avoid creating a short in the battery.
WARNING
Label Printer and USB Cable
•
Use the included USB cable to prevent any damage.
•
DO NOT use the Label Printer during a thunderstorm.
•
DO NOT damage the Label Printer or the USB cable.
•
DO NOT place heavy objects on the Label Printer or the USB cable.
•
DO NOT forcibly bend or pull the USB cable.
•
DO NOT disassemble or modify the Label Printer or the USB cable.
•
DO NOT drop or hit the Label Printer or the USB cable.
•
DO NOT allow the Label Printer or the USB cable to come into contact with liquids.
•
If you notice abnormalities such as smell, heat generation, discolouration, or deformation while in use or
storage, stop using the Label Printer, disconnect the USB cable, and remove the battery.
•
When the Label Printer is not being used, store it out of the reach of children. In addition, do not allow
children to put any Label Printer parts or labels in their mouths. If ingested, seek immediate medical
advice.
CAUTION
Label Printer and USB Cable
•
Use only the dedicated rechargeable battery (PA-BT-003).
•
Be careful when closing the Cassette Cover. There is a risk of injury if your finger gets pinched between
the upper and lower parts of the cover.
•
DO NOT drop the Label Printer when removing it from the box or relocating it, otherwise you may get
injured.
•
DO NOT touch the cutter blade, otherwise you may get injured.
•
DO NOT touch the print head or any metal parts near the print head. The print head becomes very hot
during use and remains very hot immediately after use. There is a risk of burns if you touch it.
4
Advertisement
Table of Contents
