DS4 Bi-phasic Stimulus Isolator
Precautions and Warnings
Operator's Manual
Carefully study this Operators Manual before using the DS4 Bi-phasic Stimulus Isolator.
Explosion and Fire
The DS4 must not be used in an explosive atmosphere or volatile atmosphere.
Damage
The DS4 and/or any accessories must not be used if there are any signs of external damage.
Moisture
The DS4 and/or any accessories must not be used if any parts are wet or damp.
Electrical Interference
This unit has been fully tested for European (CE) EMC conformity. This unit should NOT be used near radio
transmitters. If any 'strange' behaviour of the unit is noted, discontinue use immediately and refer to a qualified
EMC engineer.
Contact Address
Digitimer Limited
37 Hydeway
Welwyn Garden City
AL7 3BE
UK
Telephone:-
Fax:-
E-mail:-
Website:-
Servicing & Maintenance
This equipment does not require any regular maintenance but if you would like your DS4 to be serviced we
are happy to do so. Please contact us for a reference number and instructions before despatching the unit.
Before each use - The case and all interconnecting cables should be inspected for any damage. The equipment
(or the lead) should be sent for repair if any damage is found.
Environmental Considerations
The European Union has adopted Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
with requirements that went into effect August 13, 2005. WEEE is intended to reduce the disposal of waste
from electrical and electronic equipment by establishing guidelines for prevention, reuse, recycling and
recovery.
As part of our legal obligation, Digitimer Limited is a registered EEE producer. Our WEEE registration number
is WEE/BJ0052TQ. For further information relating to the correct method of disposal of any of our equipment,
which features this label
Digitimer Ltd.
(UK) 01707 328347
(UK) 01707 373153
sales@digitimer.com or technical@digitimer.com
www.digitimer.com
, please contact us.
6 of 21
DS4 Operator's Manual Issue 1.1
(Int.) +44 1707 328347
(Int.) +44 1707 373153
Copyright 2019
Need help?
Do you have a question about the DS4 and is the answer not in the manual?