Battery Level Indicator; Zoom; Indicator Status; Reset - LOGICOM SPY-C Manual

8.11 - Battery Level Indicator

This indicator tells you the current battery level. The table below shows the
various levels available:
Status

8.12 - Zoom

To zoom in, press the
To zoom out, press the
The zoom level is shown in % at the top of your control screen.

8.13 - Indicator Status

The table below summarizes the indicator status messages:
Color
Green (see
Diagrams, item #4)
Red Green (see
Diagrams, item #5)
Blue Green (see
Diagrams, item #4)

9 - Reset

To reset your Spy-C Tank to original factory settings, press the Reset button,
located on the underside of your Spy-C Tank, for seven (7) seconds using a fine
tip or a paperclip (see Diagrams section).
button.
button.
Status
Steady Powered on, Spy-C Tank initializing
(30 sec)
Steady Acceptable battery level for normal use of
the Spy-C Tank
Flashing Low battery
Steady The Spy-C Tank is connected, and the
application is open.
Flashing The Spy-C Tank is ready to be connected.
Meaning
Battery level indicator
Battery level at 100%
Battery level at 75%
Battery level at 50%
Battery level at 25%
Replace batteries
Meaning
32