Related Manuals for BAFANG BT F03.450.UC
Summary of Contents for BAFANG BT F03.450.UC
-
Page 1: Table Of Contents
8 USER MANUAL FOR BT F03.450.UC CONTENT 8.1 Introductions 8.2.1 Installing the Battery 8.2.2 Removing the Battery 8.1.1 Battery 8.2.3 Charging the Battery 8.1.1.1 Safety Instructions 8.2.3.1 Safety Instructions 8.1.1.2 Battery Storage 8.2.4 LED Display for Charge Status and Charging Capacity 7 8.1.1.3 Battery Wear... -
Page 2: Introductions
Immediately wash your eyes carefully with clean water and consult a doctor or a hospital. Please only use the original BAFANG charger to A faulty battery can lead to overheating, charge the battery. The battery is not fully smoking or burning. -
Page 3: Battery Storage
Do not intentionally short-circuit the • To prevent a deep discharge, the battery is battery. put into sleep mode after a certain time. Never allow the plus and minus connectors to • Do not extend the battery to temperatures come into contact with each other. Do not below the permissible storage temperature allow the battery to come into contact with of -10 °C to 35 °C. -
Page 4: Charger
Disconnect the charger from the power supply when not in use. 8.1.2.1 Battery charger Instructions • Use only the original Bafang charger that came Read the instructions on the external label of with your pedelec. your charger before using the battery. -
Page 5: Operation
8.2 OPERATION 8.2.2 Removing the battery 8.2.1 Installing your battery Turn the key in the frame to open the first For correct insertion, the battery must be locking mechanism of the battery. You will connected, ensuring all pins are correctly notice the top parts of the battery will connected to the battery holder. -
Page 6: Charging The Battery
8.2.3 Charging the battery charging time of your battery, see "SPECIFICATION" When the battery is fully charged, the charging Use only the original battery charger supplied to process stops automatically. Unplug the connec- you, as there is a risk of fire or explosion if the tor from the battery and then removed from the incorrect charger is used. -
Page 7: Led Display For Charge Status And Charging Capacity
Errors - Causes and Solutions Description Cause Solution Power plug is not cor- Check that all connectors on the The operating display does not rectly connected to the charger are correctly connected to light up. power supply the power supply. The battery may be mal- The charging indicator is not lit. -
Page 8: Specifications
8.3 SPECIFICATIONS 8.3.1 Battery Primary Settings BT F03.450.UC Rated voltage 43 DCV Nominal Capacity 10.5 Ah Rate Capacity 8.5 Ah (1C Discharge) Power 450 Wh Charging time 6.5h with 2A Charger Storage (At 35% SOC &-10° ~ 35 °C) 6 months...