Advertisement
INSTALLATION
1. Place the unit on a flat, stable surface.
2. Connect the satellite speakers to the base (subwoofer).
3. Connect the AC adapter to the power jack on the base (subwoofer).
4. Plug the AC adapter into an AC outlet.
5. Turn ON the device.
6. Press the Play/Pause button for 2 seconds to enter pairing mode.
7. Turn ON the Bluetooth function of your phone or tablet.
8. Pair your mobile device with the Lighted Dancing Water Speakers ("SI AUDIO"). NOTE: You may use
the included 3.5mm audio cable to connect your non-Bluetooth device (CD player, laptop, video game
console, TV, etc.) to the Audio In jack on the back of the subwoofer.
WARNINGS
RISK OF FIRE OR ELECTRIC SHOCK!
• Ensure that air can circulate freely through the ventilation holes on this unit.
• Allow at least 2" to 4" clearance around this unit.
• Never expose this unit to direct sunlight, naked flames or excessive heat.
• Never place this unit on other electrical equipment.
• Keep away from this unit during a lightning storm.
• Never remove the casing of this unit. There are no user-serviceable parts.
• Keep this unit away from water, moisture and liquid-filled objects.
• Do not immerse in water or any other liquid.
• Do not operate this unit if the cords appear frayed or damaged. Contact Sharper Image
• Customer Service immediately.
SPECIFICATIONS
Bluetooth
Wireless Frequency
Supply Voltage
Rated Power (subwoofer)
Rated Power (satellite)
Frequency Response Range
Bass Unit
Treble Unit
Operating Temperature
Storage Temperature
Storage Humidity
Dimensions (subwoofer)
Dimensions (satellite)
3.0+ EDR
2.4Ghz
DC 5V 3A
5W / 80
3W x 2 / 40
60Hz to 8KHz
220mm*325.5mm
90mm*268mm
0°C to 40°C
-15° C to 60° C
20% to 90% RH
8.7" L x 8.7" W x 12.8" H
3.5" L x 3.5" W x 10.6" H
- 3 -
Advertisement
