interstuhl EVERY EV156 Assembly Instructions

Table of Contents

Download this manual

ASSEMBLY INSTRUCTIONS

EVERY EV156

STEP 1

Unpack the box and

sort all parts.

STEP 4

Turn the seat (4) upside down.

You can use the box as a handy

assembling stool.

Take the mounting kit with the

Allen key and the 2 screws (5).

Place the base (1) upside down and

press the five castors (2) into the five

holes. Watch out for damage to the

floor or table! For example, put a towel

underneath.

Slide the armrest (6) into the opening.

Make sure that the lever is open

(push in as marked).

STEP 2

STEP 5

STEP 3

Place the base on the wheels and

insert the gas spring (3).

STEP 6

Also pay attention to the difference

between left and right, the armrest

must point forward. The front of the

seat is black.

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the EVERY EV156 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS EVERY EV156 STEP 1 STEP 2 STEP 3 Unpack the box and Place the base (1) upside down and Place the base on the wheels and sort all parts. press the five castors (2) into the five insert the gas spring (3).
Page 2 STEP 7 STEP 8 STEP 9 For the armrests you need the First, loosely tighten the screw with Now take the black plastic cover (7). Allen key and 1 screw per side. the Allen key. Then fully tighten. You During transport, this could also be The screw must go in the inner hole.
Page 3 STEP 16 STEP 17 STEP 18 Make sure the cover is properly in To assemble, you have to slide the Tighten the screws only lightly at first place. Now slide the backrest into backrest between the large and the before tightening them all with the the opening for the back bar.