Table of contents Caution! ........................3 Introduction ......................3 Safety instructions ....................3 Overview ........................3 Installation ......................5 Read ‘Safety information’ before installing the fixture............... Fastening the fixture to a flat surface ....................Mounting the fixture on a truss ......................Securing with a safety cable ....................... DMX-512 connection/connection between fixtures ................
- download the latest version of the user manual from the Internet Introduction Thank you for having chosen Honor 250C Zoom(RDM). You will see you acquired a powerful and versa- tile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by trans- portation.
Page 4
Yoke Shutters Gobo holder slot Iris slot Yoke locking knob Color frame Focus knob Zoom knob Color frame clip LCD display Handle Rotary On/off button switch Power Power Fuse Dmx in Dmx out Dmx signal indicator LCD display Power indicator Menu Down Enter...
Installation Read ‘Safety information’ before installing the fixture. The fixture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that none of the fixture’s ventilation slots are blocked. Fasten the fixture to a secure structure or surface. Do not stand it on a surface or leave it where it can be moved or fall over.
Securing with a safety cable Secure the fixture with a safety cable (or other secondary attachment) that is approved for the weight of the fixture so that the safety cable will hold the fixture if a primary attachment fails. Loop the safety cable through the eyebolt in the back of the fixture and around a secure anchoring point. Do not loop the safety cable around the fixture’s mounting bracket only, as this will leave the fixture un- secured if it separates from the bracket.
Earth(Ground) Operation The Honor 250C Zoom(RDM) zoom can operate in three different modes. In each mode you can run the fixture as a stand alone fixture or in a master/slave confiugration. This next section will detail the differ- ences in the operating modes.
Theatre Dimmer mode, Theatre Fade in Custom dimmer curve (150 ms~2230 ms) Custom Fade out (150 ms~2230 ms) Advanced settings/calibration(Only qualified technicians should perform Authorization On/Off this function. Inqure your local dealer for password.) Signal Priority Signal priority setting On/Off Advance Signal Hold Run if signal cut...
In the case of the Honor 250C Zoom(RDM) zoom, which is 1/2/3 channels fixture. If you set, for example, the address in the 1 channel mode to channel 2, the device will use the channel 2 for control.
Dimmer Advance Rotary Knob function The knob in the rear panel of the Honor 250C Zoom(RDM) act as multi function. Including rotary control of dimmer, up/down/enter function function. Dimmer & strobe function: 1. Press the MENU button to enter the main menu.
Set dimmer curves This function allows you to select preset dimmer curves as well as custom dimmer curves. Menu Menu>Dimme r Curve Mode Standard Mode Stage Architecture Dimmer Advance Theatre To set preset dimmer curves: 1. Press the MENU button to enter the main menu. 2.
DMX Protocol 1 Channel Mode Function Function Control Dimmer 000-255: 0-100% dimmer 4 Channels Mode Function Function Control 000-255: Red dimmer 0-100% Green 000-255: Green dimmer 0-100% Blue 000-255: Blue dimmer 0-100% White 000-255: White dimmer 0-100% 6 Channels Mode Function Function Control Dimmer...
10 Channels Mode Function Function Control 000-004: No function 005-040: 2800K 041-076: 3089K Color temperature 077-112 3200K 113-148 4200K 149-184 5600K 185-220 7600K 221-255 8000K 000-004: No function Color fading 005-255: Color fading 000-004: No function Color marco 005-130: Color jump, speed increasing 131-255: Color fading, speed increasing 005-005: No function 006-047: Dimmer mode, Standard...
Check the connection of power and main fuse. Be sure the external fuse has not blown. • Measure the mains voltage on the main connector. Technical specifications Model Honor 250C Zoom(RDM) Power supply: AC100-240V, 50/60Hz Light source: 250W LED Color temperature:...
Need help?
Do you have a question about the HONOR 250C ZOOM and is the answer not in the manual?
Questions and answers