Sony BDV-E770W Operating Instructions Manual page 16

To install the speakers on a wall
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
3
30 mm (1 / inches)
16
2
Fasten the screws to the wall.
For the center speaker
8 to 10 mm
11 13
( / to / inch)
32 32
3
Hang the speakers on the screws.
Rear of the speaker
16
US
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
3
4 mm ( / inch)
16
219 mm
5
(8 / inches)
8
Hole on the back of
5 mm
the speaker
7
( / inch)
32
10 mm
13
( / inch)
32
5 mm
7
( / inch)
32
10 mm
13
( / inch)
32
For the other speakers
8 to 10 mm
11 13
( / to / inch)
32 32
Hole on the back of
the speaker