Sony BDV-E770W Operating Instructions Manual page 11

Surround amplifier
Front panel
S-AIR/STANDBY
A "/1 (Power)
Turns the surround amplifier on/off.
B S-AIR/STANDBY indicator
You can check the status of wireless
transmission between the main unit and
surround amplifier.
Indicator Status
Turns green. The system is turned on,
wireless transmission is
activated and surround signals
are transmitting.
Flashes green The system is turned on and
quickly. wireless transmission is
activated, but surround signals
are not transmitting.
Flashes green The system is turned on and
slowly. wireless transmission is
deactivated.
Turns red. The surround amplifier is in
standby mode while the system
is in standby mode or wireless
transmission is deactivated.
Turns off. The surround amplifier is
turned off.
Flashes orange. The wireless transceiver is not
connected.
Flashes red. The surround amplifier's
protection is active.
Rear panel
A B C
S-AIR ID
C S-AIR ID switch
Selects the S-AIR ID.
D PAIRING button
Starts pairing.
E PAIRING indicator
Indicates the pairing status.
F SURROUND SELECTOR switch
Selects the mode for the surround amplifier.
G SPEAKERS jacks
H Wireless transceiver (EZW-RT10) slot
SURROUND SELECTOR
L R
IMPEDANCE USE
PAIRING 3-16
SURROUND SURROUND BACK
SPEAKERS
EZW-RT10
11
US