Cleaning Operation - CAB SKYLINE 1 Instruction Manual

Pic. 24
For an easy removal of the bowl follow instructions shown in Pictures 26 & 27.
Pic. 26
Pic. 28
Pic. 30
ATTENTION: Place all the components in a safe place in order to be sure
they are not lost.
Clean the components with dish-washing soap and tepid water. Never use
abrasive cleaners.
NOTE: Do not use too hot water to clean the plastic components .
1
BASIC SANITIZING OPERATIONS
Pic. 25
Place fingers under
the front lower part
of the bowl, near the
tap, and push
upwards until legs
pop out.
Pic. 29
Once the spiral blade
is removed complete-
ly remove the suction
cap gasket from the
front spiral as shown
in Pict. 30
Fill the tank with tepid water and
empty it just using the tap.
See picture 24 & 25.
Pic. 27

CLEANING OPERATION

To remove spiral blade put fingers on
the plate part of the spiral and pull it
onwards gently as shown in Pict. 28
& 29.
Pic. 31
33
T u r n power off.
Place fingers behind
the bowl legs and
pull the bowl onwards
slowly until it has
been completely
removed.
Remove bowl gasket
from the back part of
the evaporator
(see Pict. 31).
tube