Installation; Storage And Dismantling - Bonnet Neve MULTIWINE PLUS User Instructions

INSTALLATION

STORAGE AND DISMANTLING

WARNING! Use protective gloves during unpacking and installation operations.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon wrapping.
Keep all packaging away from children. For each subsequent handling of the cabinet, the use of the wooden platform is
recommended. Carefully remove the packaging, taking care not to damage the components and not to throw away those
that will be needed for assembly.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon
wrapping. It must only be handled using a fork lift truck with adequate power to the load.
Positioning the appliance horizontally or on its side or upside down is to be strictly avoided.
The equipment MUST be kept vertical.
NYLONE COVERING
To unpack the bench proceed as follows:
1. Unscrew the screws and remove the wooden cage
2. Remove the plastic cover
3. Unscrew the 8 screws from the wooden base.
4. Using the hydraulic jack.
5. Remove the wooden base.
6. Position the bench adjusting the feet.
1
CAGE WOODEN PACKAGING
CARDBOARD CORNERS
WARNING!
To remove the wooden base, only use the hydraulic jack (shown on the side).
WARNING!
Do not use forks (pallet trucks) to remove the wooden base.
POLYSTYRENE
WOODEN BASE
2
2
-28-