Table of Contents
Advertisement
1. Features
The extension kit is a dedicated part for the electronic sewing machine PLK-G1010 standard
specifications, and is used to extend the sewing area in the X axis direction by 110mm. This kit is
configured of the X axis table mechanism part, clamp mechanism part and parts for the sewing
machine including the slide plate and reinforcement support parts, etc.
The pneumatic pressure control device for changing the magnetic type work clamp, mounted as a
standard on the sewing machine, to the pneumatic type clamp is enclosed, so the force for clamping
the material to be stitched can be increased, and the clamping speed can also be adjusted.
2. Specifications
Name
Applicable model:
Sewing area
Clamp UP position
Pressing operation
Drive source air
pressure
CAUTION
Trouble such as operation errors could occur if the secondary pressure is set too high.
Use within the range of 0.4 MPa (4 kgf /cm
： MP-G10-EX (Extension Kit)
： PLK-G1010
： 210 (X) mm X 100 (Y) mm
： 30 mm
： Use foot switch normally provided with the electronic
： 0.5 MPa（5 kgf /cm
Primary side
： 0.4 MPa（4 kgf /cm
Secondary side:
2
sewing machine
2
）or more
2
）
).
- 1 -
Advertisement
Table of Contents
